Wednesday 30-Mar-2016, 04:53 PM
(This post was last modified: Wednesday 30-Mar-2016, 05:18 PM by Bolt_2112.)
Today's update!
Got stuck into the handle mounting. Now this was important as the 2 bolts I used not only hold on the handle system but also stop the internal tray from sliding out from the casing. I used 2 wing-nuts mounted in the tray as the anchors for the bolts. I just used a dremel with a cutting disc and router bit and a chisel, add some glue and you are done!
Ignore the messy scratch the router bit tried to run away!
Outside view, bolts stick out from the base of the blaster but shouldn't be too noticeable
Oh and here's a present for you Jonah: the first time I have spun the blaster carrying it.
On that bombshell, that's it for today!!
Got stuck into the handle mounting. Now this was important as the 2 bolts I used not only hold on the handle system but also stop the internal tray from sliding out from the casing. I used 2 wing-nuts mounted in the tray as the anchors for the bolts. I just used a dremel with a cutting disc and router bit and a chisel, add some glue and you are done!
Ignore the messy scratch the router bit tried to run away!
Outside view, bolts stick out from the base of the blaster but shouldn't be too noticeable
Oh and here's a present for you Jonah: the first time I have spun the blaster carrying it.
On that bombshell, that's it for today!!