Tuesday 13-Jan-2015, 08:29 PM
"If money pics is all that you love, then that's what you'll receive"
Apologies for the bad joke... OK so a bit more progress... a few more pics!
Another popular mod - drilled out the blobs at the end of the barrel and replaced with hexagon screws
Moving down to the other end we have our end cap. Two things regarding the end cap...
Replace the metal ring with a more accurate one
Also my end cap was really loose as the square locks were too thin, so I decided to cut some small squares of ABS plastic and super glue them into the cap. Locks in much better now!
Even though these will be mostly hidden by the folding stock I decided to drill out the holes on the barrel... was just in the moment
Speaking of the folding stock, I cleaned this up a bit
Then I drilled out the holes on the bottom side and cut out an inlay to fit a metal bar
Another chapter tomorrow....
Apologies for the bad joke... OK so a bit more progress... a few more pics!
Another popular mod - drilled out the blobs at the end of the barrel and replaced with hexagon screws
Moving down to the other end we have our end cap. Two things regarding the end cap...
Replace the metal ring with a more accurate one
Also my end cap was really loose as the square locks were too thin, so I decided to cut some small squares of ABS plastic and super glue them into the cap. Locks in much better now!
Even though these will be mostly hidden by the folding stock I decided to drill out the holes on the barrel... was just in the moment
Speaking of the folding stock, I cleaned this up a bit
Then I drilled out the holes on the bottom side and cut out an inlay to fit a metal bar
Another chapter tomorrow....