Tuesday 21-Jan-2014, 05:39 PM
As some of you maybe aware, I have started the process of sourcing an M96 Mauser pistol for the base to undertake a mould off and start producing Australian made option.
This came in the post from Hong Kong.
Strip down and cut into casting sections has been done.
First 2 parts of the mould have been made for the main body component.
On the side I as started casting up a few of the rear sight assembly's at request.
Next is to make moulds of the barrel assembly the scope which has been generously provided by Oevil1, this is a real one as well so no recasting is going on in any area of this development.
Terror
This came in the post from Hong Kong.
Strip down and cut into casting sections has been done.
First 2 parts of the mould have been made for the main body component.
On the side I as started casting up a few of the rear sight assembly's at request.
Next is to make moulds of the barrel assembly the scope which has been generously provided by Oevil1, this is a real one as well so no recasting is going on in any area of this development.
Terror