+- Redback Garrison (https://www.501st.com.au/forum)
+-- Forum: Garrison Armourers & Mentors (https://www.501st.com.au/forum/forum-3.html)
+--- Forum: Armoury (https://www.501st.com.au/forum/forum-51.html)
+--- Thread: Sly's first build E-11 Doopy full resin (/thread-8623.html)
Sly's first build E-11 Doopy full resin - Sly - Saturday 31-May-2014
Hi all
Today it has begun, Token brown box photo
Plastic goodness inside
RE: Sly's first build E-11 Doopy full resin FINISHED Yippy - Sly - Sunday 1-Jun-2014
Whats in the box
Sorry, cant seem to get any images to load?????
RE: Sly's first build E-11 Doopy full resin - Sly - Sunday 1-Jun-2014
OK, lets try again
http://s1270.photobucket.com/user/Sly1169/media/IMG_0917_zps1530a7f5.jpg.html?sort=3&o=8
Started to mod the kit Front sight trimmed, also beginning to cut down and mod the magazine loader and mag I bought from Gazmosis
http://s1270.photobucket.com/user/Sly1169/media/IMG_0937_zps4d615fe3.jpg.html?sort=3&o=5
RE: Sly's first build E-11 Doopy full resin - Bullant - Sunday 1-Jun-2014
If you put [i m g] before and [/ i m g] after your photo url (without the spaces), the photos will be embedded in your post like this:
![[Image: IMG_0917_zps1530a7f5.jpg]](http://i1270.photobucket.com/albums/jj610/Sly1169/IMG_0917_zps1530a7f5.jpg)
RE: Sly's first build E-11 Doopy full resin - Sly - Monday 2-Jun-2014
![[Image: IMG_0951_zps661d1abd.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0951_zps661d1abd.jpg.html)
Started trimming a few parts , front sight magazine
![[Image: IMG_0952_zps1e3e8672.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0952_zps1e3e8672.jpg.html)
Also drill out and file parts of the folding stock
RE: Sly's first build E-11 Doopy full resin - Sly - Tuesday 3-Jun-2014
Trip to Bunnings for supplies
1x strip of aluminium 20mm wide, 3mm thick for scope rail and a length of 40x40 angle bracket.
Used Billhag TK-1650so build guide and hey pressto!!!
![[Image: IMG_0954_zpsa5a3e664.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0954_zpsa5a3e664.jpg.html)
Now to see how its going to look and fit
![[Image: IMG_0955_zps4caee166.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0955_zps4caee166.jpg.html)
Not too shabby, so far
![[Image: IMG_0956_zpsbad4cbaf.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0956_zpsbad4cbaf.jpg.html)
Drilled out the blobs at the barrel and replaced with Hex bolts
![[Image: IMG_0957_zps31694903.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0957_zps31694903.jpg.html)
RE: Sly's first build E-11 Doopy full resin - stormraven - Tuesday 3-Jun-2014
Looking good Sly should look really good when you're finished.
RE: Sly's first build E-11 Doopy full resin - Sly - Tuesday 3-Jun-2014
Thanks Stormraven, early days though, still plenty I can stuff up.
Hope the finished product comes up ok.
RE: Sly's first build E-11 Doopy full resin - Sly - Tuesday 3-Jun-2014
![[Image: IMG_0972_zps126334ab.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0972_zps126334ab.jpg.html)
Decided to start work on the pistol grip, first drilling out the dodgy resin hex bolt with a 10mm drill bit or a 3/8 if you like.
then cut the thread off a 10mm hex bolt to be placed in the hole
Will glue the bolt head in a a later date
![[Image: IMG_0971_zps0a6aa428.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0971_zps0a6aa428.jpg.html)
RE: Sly's first build E-11 Doopy full resin - Oevil1 - Tuesday 3-Jun-2014
Looking good mate! Stay on target... :-)
RE: Sly's first build E-11 Doopy full resin - Sly - Tuesday 3-Jun-2014
Now on the trigger, not an original idea as I got this from another build thread.
Mark lines on the trigger for positioning, cut a piece of coat hanger as the pivot, and cannibalise a pen for a spring.
![[Image: IMG_0961_zps2122999e.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0961_zps2122999e.jpg.html)
The hole for the pin is only partially drilled into the opposite side, the pin will be cut to length and the hole puttied over before painting.
![[Image: IMG_0963_zps26062b4f.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0963_zps26062b4f.jpg.html)
Then drilled a hole in the top of the trigger, slowly, slowly. Drill a hole on an angle into the base of the grip, to stop the spring from moving or ever popping out.
![[Image: IMG_0964_zps503cfa03.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0964_zps503cfa03.jpg.html)
![[Image: IMG_0965_zpse807d876.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0965_zpse807d876.jpg.html)
Forward position.
![[Image: IMG_0970_zpsbb0fb19f.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0970_zpsbb0fb19f.jpg.html)
Back position.
![[Image: IMG_0969_zpsf455ac8b.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0969_zpsf455ac8b.jpg.html)
RE: Sly's first build E-11 Doopy full resin - Agent Smith - Tuesday 3-Jun-2014
Mate that is going to be first class ..nice work.
RE: Sly's first build E-11 Doopy full resin - Sly - Wednesday 4-Jun-2014
Thought I would start work on power cylinders.
found the right size nuts and bolts at Brisbane Fasteners at Brendale
![[Image: IMG_0973_zps46a56a13.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0973_zps46a56a13.jpg.html)
Sorry for the out of focus photo
First I ground the resin bolts off the front, then very carefully drilled the holes to screw the very small bolts into.
Once ready for final assembley I will grind the heads off and locktight the nets in place.
![[Image: IMG_0974_zps5df72dc3.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0974_zps5df72dc3.jpg.html)
![[Image: IMG_0975_zpsc870e2ba.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0975_zpsc870e2ba.jpg.html)
Checking for alignment
![[Image: IMG_0976_zps553d5815.jpg]](http://s1270.photobucket.com/user/Sly1169/media/IMG_0976_zps553d5815.jpg.html)
Sly's first build E-11 Doopy full resin - Duras - Wednesday 4-Jun-2014
Oooh nice... Will have to look that place up as need some fasteners. I lost one of the ones from the kit I bought
RE: Sly's first build E-11 Doopy full resin - Oevil1 - Thursday 5-Jun-2014
Sweet job on the trigger! Everyone wants to squeeze the trigger!
And yes...Brisbane Fasteners is my second home too. That and Pine Rivers Bearings!