Thursday 7-Apr-2016, 05:48 PM
Today's progress!
Lots of little jobs done today. I painted and mounted the sight, the ammo mag and copper strips. So now it looks like this!
![[Image: 20160407_164815_zpsiyjvliva.jpg]](http://i1310.photobucket.com/albums/s655/Luke_Shadbolt/Z-6%20Rotary%20Cannon%20Build/20160407_164815_zpsiyjvliva.jpg)
The Sight:
I removed the front part "C" and replaced it with a larger part. It just sits underneath the very front of the sight and the one I nailed in yesterday was a little small making it a bit wonky.
![[Image: 20160407_164828_zpsi5ci3wtt.jpg]](http://i1310.photobucket.com/albums/s655/Luke_Shadbolt/Z-6%20Rotary%20Cannon%20Build/20160407_164828_zpsi5ci3wtt.jpg)
It has these nice 3d printed parts on the front:
These are like adding the stickers to a model kit that you have just built, they're the best bit!
![[Image: 20160407_164941_zpszzmji8jr.jpg]](http://i1310.photobucket.com/albums/s655/Luke_Shadbolt/Z-6%20Rotary%20Cannon%20Build/20160407_164941_zpszzmji8jr.jpg)
Looking down the sight:
![[Image: 20160407_165125_zpsuw86ztbf.jpg]](http://i1310.photobucket.com/albums/s655/Luke_Shadbolt/Z-6%20Rotary%20Cannon%20Build/20160407_165125_zpsuw86ztbf.jpg)
The rear cover:
This came up okay, but the copper coloured parts are too short! I will add a horizontal strip to the bottom to neaten it up later.
![[Image: 20160407_164838_zpsourtyxca.jpg]](http://i1310.photobucket.com/albums/s655/Luke_Shadbolt/Z-6%20Rotary%20Cannon%20Build/20160407_164838_zpsourtyxca.jpg)
Cover removed:
![[Image: 20160407_164856_zpstnlk8gc7.jpg]](http://i1310.photobucket.com/albums/s655/Luke_Shadbolt/Z-6%20Rotary%20Cannon%20Build/20160407_164856_zpstnlk8gc7.jpg)
The cover is held on with some cupboard magnetic catches:
![[Image: 20160407_164903_zpspq0291uu.jpg]](http://i1310.photobucket.com/albums/s655/Luke_Shadbolt/Z-6%20Rotary%20Cannon%20Build/20160407_164903_zpspq0291uu.jpg)
The ammo mag:
Another lovely 3d printed part
![[Image: 20160407_164831_zpszhtwm8jv.jpg]](http://i1310.photobucket.com/albums/s655/Luke_Shadbolt/Z-6%20Rotary%20Cannon%20Build/20160407_164831_zpszhtwm8jv.jpg)
The grip:
Looks like an alien! But you can see the (silver) main spin switch and two (red) sound triggers.
![[Image: 20160407_164928_zpsbxlkcf0z.jpg]](http://i1310.photobucket.com/albums/s655/Luke_Shadbolt/Z-6%20Rotary%20Cannon%20Build/20160407_164928_zpsbxlkcf0z.jpg)
So that is all the major components attached to the blaster now, hence all the show-off photos today
That's it!!
Lots of little jobs done today. I painted and mounted the sight, the ammo mag and copper strips. So now it looks like this!
![[Image: 20160407_164815_zpsiyjvliva.jpg]](http://s1310.photobucket.com/user/Luke_Shadbolt/media/Z-6%20Rotary%20Cannon%20Build/20160407_164815_zpsiyjvliva.jpg.html)
The Sight:
I removed the front part "C" and replaced it with a larger part. It just sits underneath the very front of the sight and the one I nailed in yesterday was a little small making it a bit wonky.
![[Image: 20160407_164828_zpsi5ci3wtt.jpg]](http://s1310.photobucket.com/user/Luke_Shadbolt/media/Z-6%20Rotary%20Cannon%20Build/20160407_164828_zpsi5ci3wtt.jpg.html)
It has these nice 3d printed parts on the front:
These are like adding the stickers to a model kit that you have just built, they're the best bit!
![[Image: 20160407_164941_zpszzmji8jr.jpg]](http://s1310.photobucket.com/user/Luke_Shadbolt/media/Z-6%20Rotary%20Cannon%20Build/20160407_164941_zpszzmji8jr.jpg.html)
Looking down the sight:
![[Image: 20160407_165125_zpsuw86ztbf.jpg]](http://s1310.photobucket.com/user/Luke_Shadbolt/media/Z-6%20Rotary%20Cannon%20Build/20160407_165125_zpsuw86ztbf.jpg.html)
The rear cover:
This came up okay, but the copper coloured parts are too short! I will add a horizontal strip to the bottom to neaten it up later.
![[Image: 20160407_164838_zpsourtyxca.jpg]](http://s1310.photobucket.com/user/Luke_Shadbolt/media/Z-6%20Rotary%20Cannon%20Build/20160407_164838_zpsourtyxca.jpg.html)
Cover removed:
![[Image: 20160407_164856_zpstnlk8gc7.jpg]](http://s1310.photobucket.com/user/Luke_Shadbolt/media/Z-6%20Rotary%20Cannon%20Build/20160407_164856_zpstnlk8gc7.jpg.html)
The cover is held on with some cupboard magnetic catches:
![[Image: 20160407_164903_zpspq0291uu.jpg]](http://s1310.photobucket.com/user/Luke_Shadbolt/media/Z-6%20Rotary%20Cannon%20Build/20160407_164903_zpspq0291uu.jpg.html)
The ammo mag:
Another lovely 3d printed part
![[Image: 20160407_164831_zpszhtwm8jv.jpg]](http://s1310.photobucket.com/user/Luke_Shadbolt/media/Z-6%20Rotary%20Cannon%20Build/20160407_164831_zpszhtwm8jv.jpg.html)
The grip:
Looks like an alien! But you can see the (silver) main spin switch and two (red) sound triggers.
![[Image: 20160407_164928_zpsbxlkcf0z.jpg]](http://s1310.photobucket.com/user/Luke_Shadbolt/media/Z-6%20Rotary%20Cannon%20Build/20160407_164928_zpsbxlkcf0z.jpg.html)
So that is all the major components attached to the blaster now, hence all the show-off photos today
That's it!!
![[Image: 53635972792_7031aa3c80_z.jpg]](https://live.staticflickr.com/65535/53635972792_7031aa3c80_z.jpg)
