PVC pipe for DH-17

[The Sniper]

Know we have some hardware workers out there, so here goes. I'm looking for 1 1/4 inch pvc pipe for a Rebel blaster. I have 1 1/2 inch, but that is a fraction too big in diameter for what I need.

The DH-17 is very close and uses some of the same parts as the E-11, which I just received today from Doopy Doo's.

Any info where to buy some 1 1/4 inch pipe would be wizard.

[TheWolf]

You need some 32 mm pressure pipe from Bunnings. Look for the grey PVC stuff.... Not the white PVC.

Though, from memory, the Sterling has an OD of 38mm.... Although the kit you have may be made for 32mm pipe, like some e-11 kits....

I have some 32mm Aluminum pipe here if you want to borrow some..

[The Sniper]

Thanks Wolf, 32mm is what I need as it's for a kit. I'll take the end cap down to Bunning on the way home tomorrow and check the fit. I'm doing a ROTJ version, a bit different that ANH one.

[Agent Smith]

I saw some do hickies at bunnings the other day in the section that have anti mozzie burners. They were about the same size, black and had holes in the right places..they looked ideal for a barrel.

[The Sniper]

I know the ones you're talking about, I'll check them out as well.