Thought I would Start a new thread for this, so this image is also posted on my Blaster build.
The options were, buy a Doopy stand, approximate cost shipped = to expensive, or build it myself option.
Cost $3.80 for a piece of Pine from Bunnings.
So I drew up some plans, looks similar to the Doopy stand so a good place to start from.
I made some cardboard templates first in order to make sure the dimensions would work.
Timber cut to size
Parts taped together for a test fit, these will be sanded and shaped prior to painting.
Started glueing and pinning the parts together.
The base will be screwed and glued, the supports were glued and tacked together with small nails, then I used a nail punch and filled the holes with putty.
The options were, buy a Doopy stand, approximate cost shipped = to expensive, or build it myself option.
Cost $3.80 for a piece of Pine from Bunnings.
So I drew up some plans, looks similar to the Doopy stand so a good place to start from.
I made some cardboard templates first in order to make sure the dimensions would work.
Timber cut to size
Parts taped together for a test fit, these will be sanded and shaped prior to painting.
Started glueing and pinning the parts together.
The base will be screwed and glued, the supports were glued and tacked together with small nails, then I used a nail punch and filled the holes with putty.
"The Death Star plans are not in the main computer"