Redback Garrison
Hasbro E-11: Satin or Matt - Printable Version

+- Redback Garrison (https://www.501st.com.au/forum)
+-- Forum: Garrison Armourers & Mentors (https://www.501st.com.au/forum/forum-3.html)
+--- Forum: Armoury (https://www.501st.com.au/forum/forum-51.html)
+--- Thread: Hasbro E-11: Satin or Matt (/thread-4824.html)

Hasbro E-11: Satin or Matt - Bullant - Wednesday 22-Aug-2012

I have completed my hasbro E-11 doopy-doos conversion, painted with 2 coats of hammered silver, and 2 coats of satin black.

However, I'm finding that the satin looks more gloss than satin.

I bought a can of matt clear coat, and was just about to let spray when I started having second thoughts.

Any suggestions? Is the general consensus that matt or shiny looks better for the E-11?

RE: Hasbro E-11: Satin or Matt - Cavalier - Wednesday 22-Aug-2012

Personally a Matt fan Td

RE: Hasbro E-11: Satin or Matt - Bullant - Wednesday 22-Aug-2012

This is what it currently looks like. Although I reckon it looks shinier in real life than what it shows in the photo. I'll try and get a picture of just the blaster tomorrow when there's better lighting.

[Image: IMG_1727.jpg]

RE: Hasbro E-11: Satin or Matt - Oevil1 - Thursday 23-Aug-2012

I prefer a Satin to Matt finish rather than shiny...the handle should be a gloss and the remainder a satin or matt finish. If you want to get picky, the t-track should be matt as the originals were rubber.
You could try going over some of it with a clear satin or clear matt in thin layers till you get want you want.
Here's my Doopy pipe kit...
[Image: DSCF7030.JPG]


You can find it on this thread...
http://www.501st.com.au/forum/thread-4423.html

Although looking at it again...I might do my current one I'm making with a little more matt rather than satin.

RE: Hasbro E-11: Satin or Matt - TheWolf - Thursday 23-Aug-2012

I prefer to use matt as the oil frm your hands will eventually make parts go shiney anyhow, and it gives it a nice 'worn' look.

RE: Hasbro E-11: Satin or Matt - Deimos - Thursday 23-Aug-2012

I think they look better with a matt coating, guns shouldnt really be shiny :P

RE: Hasbro E-11: Satin or Matt - Bullant - Thursday 23-Aug-2012

OK, matt it is. Although if the current weather keeps up it might have to stay satin for Logan Library on Saturday, I wouldn't want a cloudy clear coat.

RE: Hasbro E-11: Satin or Matt - seantrooper - Thursday 23-Aug-2012

for e-11's, the grips(handle) should be gloss black. The rest should be a hammered finish. I used a hammered black paint for most of my e-11, and lightly sprayed a satin black over it. I think an entirely matte one would look pretty funny.

As for the t-tracks, I'm pretty sure that the originals were actually a hard plastic track... not made of rubber.

Check out my e-11 build thread for the paints I used Smile

Just fully read your first post,

you only need a VERY LIGHT coat of the satin, otherwise it will start to look too shiny.

RE: Hasbro E-11: Satin or Matt - TheWolf - Thursday 23-Aug-2012

(Thursday 23-Aug-2012, 10:08 AM)seantrooper Wrote:  As for the t-tracks, I'm pretty sure that the originals were actually a hard plastic track... not made of rubber.

There is some speculation that the original tracks were made of hard plastic, probably sliding door tracks, however, some other people suggest the original ANH tracks were made of rubber. Early Landrover windshield wipers to be exact. Later when they started casting weapons and parts of weapons in the later movies, they went over to a cast, hard track.

So it's never really been confirmed... Just speculation on bits that look the part.

RE: Hasbro E-11: Satin or Matt - seantrooper - Thursday 23-Aug-2012

(Thursday 23-Aug-2012, 01:09 PM)TheWolf Wrote:  
(Thursday 23-Aug-2012, 10:08 AM)seantrooper Wrote:  As for the t-tracks, I'm pretty sure that the originals were actually a hard plastic track... not made of rubber.

There is some speculation that the original tracks were made of hard plastic, probably sliding door tracks, however, some other people suggest the original ANH tracks were made of rubber. Early Landrover windshield wipers to be exact. Later when they started casting weapons and parts of weapons in the later movies, they went over to a cast, hard track.

So it's never really been confirmed... Just speculation on bits that look the part.

You've hit it spot on there wolf Smile

Couldn't have put it better myself! (I already tried :P)

RE: Hasbro E-11: Satin or Matt - The Sniper - Thursday 23-Aug-2012

Even though my E-11 is on the shiny side, I perfer the matt look. To me, shiny means brand new or straight out of the box. E-11's are for the hard working TK, or dirty TD's, that see combat, when they can hit something. (rebel slur there):P