Thursday 2-Jun-2016, 06:40 PM
(This post was last modified: Thursday 2-Jun-2016, 06:48 PM by Duras.)
So been making some non-Wars props lately and thought would share the builds here as well as on FB in case my "methods" help with anyone else's projects
Using Buzzard's letter opener as a basis I scaled a photo of it up to 1.2m wide and printed off
Sheet of MDF and some time with the jigsaw
I've since found out that the a Bat'leth should be as from the knee to top of the head so this one is a bit small ... but already too large for convention rules as is and MDF sheet size was easy/cheap to get
Sanded in the blade edges
Added a little personal touch and put my callsign name in Klingon script
and then some painting
few more coats to go then its wait for the paint to cure so can add the strapping and do a bit of weathering (quick test of the strapping)
using the spare MDF from the sheet also knocking out a Mek'leth ... not worth another thread as same method just different shape
Using Buzzard's letter opener as a basis I scaled a photo of it up to 1.2m wide and printed off
Sheet of MDF and some time with the jigsaw
I've since found out that the a Bat'leth should be as from the knee to top of the head so this one is a bit small ... but already too large for convention rules as is and MDF sheet size was easy/cheap to get
Sanded in the blade edges
Added a little personal touch and put my callsign name in Klingon script
and then some painting
few more coats to go then its wait for the paint to cure so can add the strapping and do a bit of weathering (quick test of the strapping)
using the spare MDF from the sheet also knocking out a Mek'leth ... not worth another thread as same method just different shape
to